匹配滤波方法研究2016年意大利中部MW6.0地震的余震迁移     

付裕  黄晖  徐鸣洁 《中国地震》2018,34(4):621-631

2016年8月24日意大利中部发生M_W6.0地震，2个月之后，震中附近相继发生M_W5.5、M_W5.9、M_W6.5地震。研究这几次较大地震间的相互触发作用及机制十分必要，然而在大地震之后传统地震目录通常缺失很多余震事件，缺失的余震事件包含着早期余震时空分布和迁移规律的信息，为完善余震目录本文利用匹配滤波方法对M_W6.0地震后80天内的连续数据进行余震检测，得到了数十倍于模板数量的新检测事件，检测事件与模板事件组成的新余震目录完备震级为1.0，提高了地震目录的完备性。依据新余震目录进行余震时空分布研究，结果显示M_W6.0、M_W5.9、M_W6.5地震的早期余震迁移规律不同。M_W6.0地震的早期余震沿着断裂走向同时朝两侧迁移；而M_W5.9、M_W6.5地震的早期余震向南、北迁移表示出不对称的特征。通过拟合余震迁移前端发现，M_W6.0、M_W5.5地震的早期余震朝着随后较大地震的方向迁移，且较符合lgt的特征，表明余震迁移可能与慢滑动有关。  相似文献   

Depth of closure: New calculation method based on sediment data     

Luis Aragonés  Jose Ignacio Pagán  Isabel López  José C.Serra 《国际泥沙研究》2018,33(2):198-207

Obtaining depth of closure (DoC) in an accurate manner is a fundamental issue for coastal engineering, since good results for coastal structures and beach nourishment depend mainly on DoC. Currently, there are two methods for obtaining the DoC, mathematical formulations and profile surveys. However, these methods can incur important errors if one does not take into account the characteristics and morphology of the area, or if one does not have a sufficiently long time series. In this work the DoC is obtained from the break in the trend of the sediment with the depth, that is, in general with the increase of the depth a decrease in the size of the sediment takes place. However, at one point this tendency changes and the size increases, and then decreases again. When comparing the point where the minimum sediment size occurs before the increase, it is observed that the error incurred is small compared to other methods. If the Standard Deviation of Depth Change (SDDC) method is considered as the most accurate method, the error incurred by the proposed method is less than 7%. In addition, it can be seen that the dispersion of the sediment method always occurs outside the zone of bar movement. Whereas in the methods of profiles survey (using 2 cm precision profiles), sometimes the DoC is obtained within the active zone of bar movement. In addition, where the relative minimum of the median sediment size is found, and the sizes of 0.063 and 0.125 mm predominate in the composition of the sample. Therefore, this new method allows the precise location of the DoC to be obtained in a fast and simple way. Furthermore, this method has the advantage that it is not affected by the modifications that may be experienced by both the study area and the cross-shore beach profile.  相似文献   

河北昌黎地震台地电阻率异常分析     

乔子云  张国苓  茅远哲  贾立峰  寇海川  周剑青  佟鑫 《地震地磁观测与研究》2018,40(1):85-90

河北昌黎台地电阻率EW测道2017年6-8月出现快速下降变化，经检测，观测系统工作正常。通过环境调研和辅助资料对比分析，发现该变化与降雨和粉丝厂干扰有一定关系。采用褶积滤波法去掉降雨干扰，EW测道地电阻率仍为下降趋势，说明该下降变化不能完全用降雨来解释，不排除是地震前异常变化的可能。  相似文献   

不同轴压比钢筋混凝土圆柱桥墩地震易损性分析          下载免费PDF全文

赵建锋  孙伟帅  李刚 《世界地震工程》2018,34(4):031-37

以墩顶漂移率为指标运用ABAQUS有限元软件对钢筋混凝土桥墩进行地震易损性分析。对钢筋混凝土桥墩模型进行精细网格划分，运用循环往复Pushover方法模拟钢筋混凝土桥墩破坏界限值，以此界限值为标准对轴压比为0.20、0.22、0.24、0.26和0.30钢筋混凝土桥墩进行增量动力分析（IDA）。研究结果表明:结构的破坏超越概率，随着轴压比的增大而增大；考虑钢筋混凝土桥墩延性抗震性能，设计轴压比不宜超过0.30；轴压比为0.24~0.26时，钢筋混凝土桥墩破坏概率增加不大，宜为合理的轴压比。  相似文献   

基于EEMD-SARIMA的对流层延迟预测模型研究     

任超  刘中流  梁月吉  甘祥前 《大地测量与地球动力学》2018,38(9):953-957

在无气象数据的条件下，提出一种基于集合经验模态分解（EEMD）和季节性自回归移动平均模型（SARIMA）的对流层延迟（ZTD）预报新方法，并分别选取长春、上海、乌鲁木齐3个地区4个季节的ZTD数据进行预测分析。结果表明，基于EEMD-SARIMA的ZTD改正预报模型能够满足不同地区、不同季节下的ZTD估计需求，是一种高精度的ZTD预报方法。  相似文献   

全球海潮模型最新进展及在中国沿海精度评估     

范长新 《大地测量与地球动力学》2019,39(5):476-481

介绍TPXO、FES、Chinatide、MIKE Global Tide、Utide等典型海潮模型，总结归纳其同化潮汐数据来源和最新的海洋地形数据，利用我国沿岸长期验潮站以外的26个中短期潮位观测站评估TPXO等海潮模型预报精度。结果表明，全球海潮模型对我国沿海M2分潮的预报精度普遍较低，且主导了几种海潮模型在中国海域的整体预报精度；相比MIKE Global Tide和TPXO7.2,TPXO8、TPXO_Yellow Sea 2010和TPXO_China&Ind模型在我国沿海的预报精度更高。  相似文献   

基于全球分布的地震观测数据估计0S0模态的特征频率及品质因子     

周丰森  王迪晋  旦增 《大地测量与地球动力学》2019,39(10):1013-1016

选取2011-03-11日本MW9.3地震后全球地震台站记录的约220 h波形数据，基于一定的判断准则，筛选出质量较高的448个垂向观测数据，采用频域AR方法对0S0模态的特征频率和品质因子进行估值，并以信噪比为权重进行加权平均，得到特征频率f=0.814 658 4±5.3×10-7，品质因子Q=5 586±12。该结果与已有研究成果相比精度更高，有助于约束现有地球介质密度和衰减模型，使其更接近真实地球。  相似文献   

A New Wavelet Method for Identification of Eddies and Assessment of Incidents on Islands of the Eastern Caribbean     

Jason D. Tambie  Madiha Farag-Miller  Keith Miller  Bheshem Ramlal  Michael Sutherland 《Marine Geodesy》2019,42(3):227-245

Using two dimensional continuous wavelet transforms, a novel method for identification of mesoscale eddies is presented to facilitate extraction of characteristics for area, amplitude, type, and location from maps of sea level anomalies. In comparison with the previously established growing method for eddy identification, it is found that the wavelet method identifies more than twice the number of eddies and is particularly better at resolving small eddies down to the 0.25 degree resolution of the data. Such research into eddy identification and tracking is significant to the assessment of eddies with potential to impact on coastlines of small islands. The method is applied to the identification of eddies on tracks towards islands of the Eastern Caribbean over 23?years. Spatial and temporal variation in rate of occurrence and magnitude is established. For Barbados there is an average of 9 anticyclonic incidents a year with maximum amplitude of typically 0.22?m in the dry seasons and 0.16?m in the wet seasons. Seasonal variation is reversed for the other islands with twice the number of anticyclonic incidents having maximum amplitudes of about 0.20?m annually.  相似文献   

云南武定县朱家坝尾矿库渗漏原因浅析     

周南  李卿  喻涌麒 《云南地质》2020,(1):118-124

位于云南省楚雄州武定县朱家坝新建尾矿库,在使用过程中,该尾矿库下游一泉水点出现尾矿粉渗漏污染,通过地质勘查,发现该尾矿库下伏昆阳群绿汁江组(Pt2lz)的白云岩基底,存在一隐伏断层,渗漏污染原因与该断层及其形成的岩溶裂隙有直接的关系。  相似文献   

Global method for stability analysis of anchored slopes     

Tan Zhang  Hong Zheng  Cong Sun 《国际地质力学数值与分析法杂志》2019,43(1):124-137

Based on the global method, an approach is proposed to consider the effect of anchor reinforcement on slope stability, where equilibrium conditions are formulated in terms of the whole slip body. Anchor pre-tension is assumed to be undertaken by the whole slip body instead of individual slices, causing internal force within slope more realistic. Meanwhile, the optimization model for locating the critical slip surface is of weak nonlinearity and easy to solve using the conventional optimization procedures. The effects of anchoring orientation and position are thoroughly investigated, and interesting results are obtained.  相似文献